View A085FW01-V1_7868331.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

version 8.0 total pages 21 date 2007.05.17 product specification color tft-lcd module model name: a085fw01 v1 no te : the c o nt e nt of t h is spec if ica t io n is su bje ct t o cha n ge . ? 2 00 6 au o ptr o nics al l r i gh ts res er v e d , d o n ot c op y. ( ..... ) preliminary specification ( ) final specification www.datasheet.co.kr datasheet pdf - http://www..net/
record of revision version revise date p a g e content 1 08/nov/2004 0 first draft. 2 11/jan/2005 9 to revise the lamp driving conditions 11 to revise the reliability test conditions 3 26/jun/2006 6 to revise electrical characteristics & lamp starting voltage 8 to revise power sequence 11 to revise vibration condition 13~14 to revise outline drawing 4 5/sep/2006 6 add note 7 in backlight driving conditions 5 3/oct/2006 6 update lamp starting voltage @ 25 and 0 6 18/oct/2006 11 revise reliability test conditions 7 9/nov/2006 change to final version on the cover page 8 17/may/2007 6 update lamp starting voltage @ -25 and 0 www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 1 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. contents: a. physical specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p3 b. electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p4 1. pin assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p4 a. tft-lcd panel driving section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p4 b.backlight driving section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p5 2.absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p5 3. electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p6 a. typical operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p6 b. current consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p6 c. backlight driving conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p6 4. ac timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p7 a. timing conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p7 b. timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p7 5. power sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p8 c. optical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p9 d. reliability test items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p11 e. packing form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p12 www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 2 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. appendix: fig.1-(a) outline dimension of tft-lcd module(front si de) . . . . . . . . . . . . . . . . . . . . . . . . . p13 fig.1-(b) outline dimension of tft-lcd module(back side) . . . . . . . . . . . . . . . . . . . . . . . . . p14 fig.2 sampling clock timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p15 fig.3 horizontal display timing range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p16 fig.4-(a) horizontal timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p17 fig.4-(b) detail horizontal timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p18 fig.5 vertical shift clock timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p19 fig.6-(a) vertical timing (from up to down) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p20 fig.6-(b) vertical timing (from down to up) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p21 www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 3 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. a. physical specifications no. item specification remark 1 display resolution(dot) 480rgb(w) 234(h) 2 active area(mm) 187.2(w) 105.3(h) 3 dot pitch(mm) 0.130(w) 0.450(h) 4 color configuration r. g. b. stripe note 1 5 overall dimension(mm) 199.0(w) 119.0(h) 5.8(d) note 2 6 weight(g) 235 10 7 surface treatment anti-glare 8 backlight unit ccfl note 1: below figure shows the dot stripe arrangement. note 2: refer to fig. 1 r g b r g b r g b r g b r g b . . ( 1 2 3. .. .1398 1399 1440 ) ( 1 ..234) www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 4 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. b. electrical specifications 1.pin assignment a. tft-lcd panel driving section pin no symbol i/o description remark 1 gnd - ground for logic circuit 2 v cc i supply voltage of logic control circuit for scan driver 3 v gl i negative power for scan driver 4 v gh i positive power for scan driver 5 stvd i/o vertical start pulse note 1 6 stvu i/o vertical start pulse note 1 7 ckv i shift clock input for scan driver 8 u/d i up/down scan control input note 1,2 9 oev i output enable input for scan driver 10 vcom i common electrode driving signal 11 vcom i common electrode driving signal 12 l/r i left/right scan control input note 1,2 13 mod i sequential sampling and simultaneous samplin g setting note 3 14 oeh i output enable input for data driver 15 sthl i/o start pulse for horizontal scan line note 1 16 sthr i/o start pulse for horizontal scan line note 1 17 cph3 i sampling and shifting clock pulse for dat a driver 18 cph2 i sampling and shifting clock pulse for dat a driver 19 cph1 i sampling and shifting clock pulse for dat a driver 20 v cc i supply voltage of logic control circuit for data driver 21 gnd - ground for logic circuit 22 vr i alternated video signal input(red) 23 vg i alternated video signal input(green) 24 vb i alternated video signal input(blue) 25 av dd i supply voltage for analog circuit 26 av ss - ground for analog circuit note 1: selection of scanning mode (please refer to the following table) setting of scan control input in/out state for start pulse u/d l/r stvd stvu sthr sthl scanning direction gnd v cc out in out in from up to down, and from left to right. v cc gnd in out in out from down to up, and from right to left. gnd gnd out in in out from up to down, and from right to left. v cc v cc in out out in from down to up, and from left to right. www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 5 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. in: input; out: output. note 2: definition of scanning direction. refer to figure as below: note 3: mod = h: simultaneous sampling. mod = l: sequential sampling. please set cph2 and cph3 to gnd when mod = h. b. backlight driving section (refer to figure 1) no. symbol i/o description remark 1 hi i power supply for backlight unit (high voltag e) -- 2 gnd - ground for backlight unit -- 2. absolute maximum ratings item symbol condition min. max. unit remark v cc gnd=0 -0.3 7 v av dd av ss =0 -0.3 7 v v gh -0.3 18 v v gl gnd=0 -15 0.3 v power voltage v gh v gl - 33 v v i -0.3 av dd +0.3 v note 1 v i -0.3 v cc +0.3 v note 2 input signal voltage vcom -2.9 5.2 v note 1: vr, vg, vb. note 2: sthl, sthr, oeh, l/r, cph1~cph3, stvd, stvu , oev, ckv, u/d. www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 6 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 3. electrical characteristics a. typical operating conditions (gnd=avss=0v, note 3 ) item symbol min. typ. max. unit remark v cc 3 5 5.5 v av dd 4.5 5 5.5 v v gh 14.3 15 15.7 v power supply v gl -10.5 -10 -9.5 v v ia 0.4 - av dd -0.4 v note 1 v iac - 3 - v ac component video signal amplitude (vr,vg,vb) v idc - av dd /2 - v dc component v cac 5.3 5.6 5.9 vp-p ac component vcom v cdc 1.6 1.9 2.2 v dc component h level v ih 0.8 v cc - v cc v input signal voltage l level v il 0 - 0.2 v cc v note 2 note 1: refer to fig.4- (a). note 2: sthl, sthr, oeh, l/r, cph1~cph3, stvd, stvu , oev, ckv, u/d. note 3: be sure to apply gnd, v cc and v gl to the lcd first, and then apply v gh . b. current consumption (gnd=avss=0v) parameter symbol condition min. typ. max. unit remark i gh v gh =15v - 0.20 0.5 m a i gl v gl =-10v - 0.20 0.5 m a i cc v cc =5v - 3.0 6.0 m a current for driver i dd av dd =5v - 15.0 30 m a c. backlight driving conditions parameter symbol min. typ. max. unit remark lamp voltage v l - 600 660 vrms note 1 lamp current i l - 6.5 7 marms note 1 frequency f l - 60 80 khz note 4 - - 1,180 vrms note 1,5 - - 1,540 vrms note 2,5 lamp starting voltage v s - - 1,780 vrms note 3,5,7 lamp life time 15,000 - - hr note 6 note 1: ta = 25 and at normal environment note 2: ta = 0 and at normal environment. note 3: ta = -25 .(product does not guarantee dark discharge start u p) note 4: the lamp frequency should be selected as di fferent as possible from display horizontal synchronous signal to avoid interference. note 5: for starting the backlight unit, the output voltage of dc/acs t ransformer should be larger than the maximum lamp starting voltage. vs value is measured from connec tor of product. the value is for reference. note 6: the lamp life time is defined as the module brightness decrease to 50% original brightness at ta=25 , i l =6.5ma. note 7: the value is only for reference. www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 7 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 4. ac timing a. timing conditions parameter symbol min. typ. max. unit. remark rising time t r - - 10 ns note 1 falling time t f - - 10 ns note 1 high and low level pulse width t cph 99 103 107 ns cph1~cph3 cph pulse duty t cwh 40 50 60 % cph1~cph3 cph pulse delay t c12 t c23 t c31 30 t cph /3 t cph /2 ns cph1~cph3 sth setup time t suh 20 - - ns sthr, sthl sth hold time t hdh 20 - - ns sthr, sthl sth pulse width t sth - 1 - t cph sthr, sthl sth period t h 61.5 63.5 65.5 s sthr, sthl oeh pulse width t oeh - 1.22 - s oeh sample and hold disable time t dis1 - 8.28 - s oev pulse width t oev - 5.40 - s oev ckv pulse width t ckv - 4.18 - s ckv clean enable time t dis2 - 3.74 - s horizontal display start t sh - 0 - t cph /3 horizontal display timing range t dh - 1440 - t cph /3 stv setup time t suv 400 - - ns stvu, stvd stv hold time t hdv 400 - - ns stvu, stvd stv pulse width t stv - - 1 t h stvu, stvd horizontal lines per field t v 256 262 268 t h note 2 vertical display start t sv 3 - t h vertical display timing range t dv 234 - t h vcom rising time t rcom - 5 s vcom falling time t fcom - 5 s vcom delay time t dcom - 3 s rgb delay time t drgb - 1 s note 1: for all of the logic signals. note 2: please dont use odd horizontal lines to dr ive lcd panel for both odd and even field simultaneously. b. timing diagram please refer to the attached drawing, from fig.2 to fig.6. 5. power sequence www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 8 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. sequence for power on/off and signal on/off vcc v avdd v gh v gl voltage trvcc t 1 t 3 t 6 t 7 t 8 90% 90% 90% 90% 90% 90% 90% 90% 10% 10% 10% 10% 10% 10% travdd trgh 10% trgl t 2 tfvcc tfavdd tfgl tfgh 10% 10% t 9 video signal ,digital signal t 4 t 5 backlight turn on t db t bd trvcc 15ms(from 10%vcc to 90%vcc ,when vcc is low to high) travdd 15ms(from 10%vavdd to 90%vavdd ,when vavdd is low to high) trgh 15ms(from 10%vgh to 90%vgh ,when vgh is low to high) trgl 15ms(from 10%vgl to 90%vgl ,when vgl is low to high) tfvcc 20ms(from 90%vcc to 10%vcc ,when vcc is high to low) tfavdd 20ms(from 90%vavdd to 10%vavdd ,when vavdd is high to low) tfgh 20ms(from 90%vgh to 10%vgh ,when vgh is high to low) tfgl 20ms(from 90%vgl to 10%vgl ,when vgl is high to low) 0 t1 10ms(from 90%vcc to 10% vavdd , when vcc is low to high) 0 t2 10ms(from 90%vavdd to 10% vgl , when vcc is low to high) 0 t3 10ms(from 90%vgl to 10% vgh , when vcc is low to high) 0 t4 10ms(from 90%vgh to video signal start ,when vgh is low to high) 0 t5 10ms(from video signal end to 90%vgh ,when vgh is low to high) t6 10ms(from 10%vgh to 90% vgl ,when vcc is high to low) t7 10ms(from 10%vgl to 90% vavdd , when vcc is high to low) t8 10ms(from 10%vavdd to 90% vcc , when vcc is high to low) t9 0.4s(from 10%vcc is h l to 10%vcc is l h ) 0 tdb 10ms(from video signal start to backlight on) 0 tbd 10ms(from backlight off to video signal end) www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 9 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. c. optical specification (note 1, note 2) item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 - - 12 18 24 36 ms ms note 3,5 contrast ratio cr at optimized viewing angle 200 300 - note 4, 5 viewing angle top bottom left right cr R 10 40 55 55 55 50 65 65 65 - - - - deg . note 5, 6 brightness y l i l =6.5ma, 25 300 400 - cd/m 2 note 7 x =0 0.26 0.31 0.36 white chromaticity y =0 0.28 0.33 0.38 note 7 note 1 : to be measured in the dark room. ambient temp erature =25 , and lamp current i l = 6.5 marms. dc/ac inverter driving frequency: 60 khz. note 2 :to be measured on the center area of panel wi th a viewing cone of 1 by topcon luminance meter bm-5, after 15 minutes operation. note 3. definition of response time: the output signals of photo detector are measured whe n the input signals are changed from black to white(falling time) and from white to black(rising time), respectively. the response time is defined as the time interval be tween the 10% and 90% of amplitudes. refer to figure as below. note 4. definition of contrast ratio: contrast ratio is calculated with the following for mula. contrast ratio (cr)= s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% photo detector output when lcd is at white state photo detector output when lcd is at black state www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 10 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. note 5. white vi=v i50 1.5v black vi=v i50 2.0v means that the analog input signal swings in phase with v com signal. means that the analog input signal swings out of phase with v com signal. v i50 : the analog input voltage when transmission is 50% the 100% transmission is defined as the transmissio n of lcd panel when all the input terminals of module are electrically opened. note 6. definition of viewing angle, refer to figur e as below. note 7. measured at the center area of the panel whe n all the input terminals of lcd panel are electrica lly opened. www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 11 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. d. reliability test conditions (note 2): no. test items conditions remark 1 high temperature storage ta= 80 250hrs 2 low temperature storage ta= -30 250hrs 3 high temperature operation tp= 70 250hrs 4 low temperature operation ta= -30 250hrs 5 high temperature and high humidity tp= 50 , 80% rh 250hrs operation 6 heat shock -30 ~70 / 50 cycles 1hrs/cycle non-operation 7 electrostatic discharge 200v,200pf(0 ), once for each terminal non-operation frequency range : 10~55hz stoke : 1.5mm sweep : 10 ~ 55 ~ 10hz 2 hours for each direction of x,y,z 8 vibration (6 hours for total) jis c7021, a-10 condition a 9 mechanical shock 100g, 6ms, x, y, z 3 times for each direction jis c7021, a-7 condition c 10 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz C6db/octave from 200~500hz iec 68-34 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces jis z0202 note1: ta: ambient temperature. note2: tp: panel surface temperature note3: in the standard conditions, there is not dis play function ng issue occurred. all the cosmetic specification is judged before the reliability stre ss. www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 12 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. e. packing form www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 13 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. fig.1-(a) outline dimension of tft-lcd module (fron t side) www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 14 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. fig.1-(b) outline dimension of tft-lcd module (back side) www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 15 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 5 0 % 5 0 % 1 0 % 1 0 % 9 0 % 9 0 % s t h l ( r ) c p h 1 c p h 2 c p h 3 s t h t s u h t t h d h c 1 2 t t c 3 1 t c 2 3 c p h t t c w h t r f t fig.2 sampling clock timing www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 16 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. i n p u t ( s t h l / s t h r ) o u t p u t ( s t h r / s t h l ) c p h 1 t d h fig.3 horizontal display timing range www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 17 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. o e h o e v v c o m 1 h t h v c d c c a c v v i d c b l a n k b l a c k v i a v i a c w h i t e b l a c k b l a n k w h i t e ( h s y ) s t h l ( r ) c k v r ( g b ) v fig.4-(a) horizontal timing www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 18 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. o e h o e v v c o m ( h s y ) s t h l ( r ) c k v r ( g b ) v 1 h t d i s 2 o e h t t d i s 1 t s t h t o e v t c k v t f c o m 9 0 % 1 0 % 5 0 % 1 0 % 9 0 % t d c o m t r c o m t d r g b n o t e : t h e f a l l i n g e d g e o f o e v s h o u l d b e s y n c h r o n i z e d w i t h t h e f a l l i n g e d g e o f o e h fig.4-(b) detail horizontal timing www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 19 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. fig.5 vertical shift clock timing www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 20 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. fig.6-(a) vertical timing (from up to down) www.datasheet.co.kr datasheet pdf - http://www..net/
model : a085fw01 v1 version : 8.0 page : 21 /21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. fig.6-(b) horizontal timing (from down to up) www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of A085FW01-V1

	To Download A085FW01-V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .